Dell Converged Enhanced Ethernet Command Reference 83
53-1002115-01
ip address
5
ip address 
Configures an IP address.
Synopsis ip address ip-address/mask [secondary]
no ip address ip-address/mask [secondary]
Operands ip-address IP address
mask Mask for the associated IP subnet. Only integers from 1-31 are supported. 
Dotted-decimal is not supported.
secondary Specifies that the configured address is a secondary IP address. If this 
keyword is omitted, the configured address is the primary IP address.
Description Use this command to configure an IP address.
Defaults There are no default configurations for this command.
Command
Modes
Interface configuration mode
User Guidelines Use no ip address to remove the IP address.
This command is supported on VLANs, LAGs and external TenGigabitEthernet interfaces.
When the secondary parameter is not specified, this command overwrites the primary IP address.
When the secondary parameter is specified, this command adds a new IP address to the interface.
The secondary address cannot be configured in the absence of a primary IP.
Example none
See Also none