Dell 8 - Show Lacp-Sys-ID

Dell Converged Enhanced Ethernet Command Reference 131
53-1002115-01
show lacp-sys-id
7
show lacp-sys-id
Displays the Link Aggregation Control Protocol (LACP) system ID and priority information.
Synopsis show lacp sys-id
Operands none
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the LACP system ID and priority.
Usage
Guidelines
The system priority and the system Media Access Control (MAC) address make up the system
identification. The first two bytes are the system priority, and the last six bytes are the globally
administered individual MAC addresses associated with the system.
Examples To display the local system ID:
switch#show lacp sys-id
% System M8428-k,00-05-1e-76-1a-a6
See Also none