Dell 8 - Spanning-Tree Cost

Dell Converged Enhanced Ethernet Command Reference 185
53-1002115-01
spanning-tree cost
11
spanning-tree cost
Changes an interface's spanning-tree port path cost.
.Synopsis spanning-tree cost cost
Operands cost Specifies the path cost for the Spanning Tree Protocol (STP) calculations. The
range of valid values is 1-200000000.
Defaults The default path cost is 200000000.
Command
Modes
Interface configuration mode
Description Use this command to configure the path cost for spanning-tree calculations.
Usage
Guidelines
Lower path cost indicates a greater chance of becoming root.
Examples To set the port cost to 128:
switch(conf-if-te-0/1)#spanning-tree cost 128
See Also show spanning-tree