Dell 8 - Delete

Dell Converged Enhanced Ethernet Command Reference 7
53-1002115-01
delete
2
delete
Deletes a specified file from the Flash.
Synopsis delete filename
Operands filename Specifies the name of the file to be deleted from the Flash of the local switch
using the following format: [flash://]filename.
Defaults There is no default configuration for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to delete a file from the Flash. After the file is deleted, it cannot be restored.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To delete a file from the Flash:
switch#delete file1
% Warning: File will be deleted (from flash:)!
Continue?(y/n):y
[or]
switch#delete flash://file1
% Warning: File will be deleted (from flash:)!
Continue?(y/n):y
See Also copy startup-config