Dell 8 - Show Qos Queue Interface

Dell Converged Enhanced Ethernet Command Reference 263
53-1002115-01
show qos queue interface
16
show qos queue interface
Displays the runtime state retrieved from the interface reflecting the number of packets and bytes
sent and received for each priority.
Synopsis show qos queue interface {{in | ex}tengigabitethernet slot/port | all}
Operands interface Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS statistics for all 10 Gbps interfaces within the system.
Command
Modes
EXEC mode
Description Use this command to display the runtime state retrieved from the interface reflecting the number of
packets and bytes sent and received for each priority.
Usage
Guidelines
For a stand-alone switch, all ASICs are considered as slot number zero (0).
Examples To display the queueing information for a 10 Gbps Ethernet interface:
switch#show qos queue interface intengigabitethernet 0/2
Interface InTenGigabitEthernet 0/2
RX RX TX TX
CoS Packets Bytes TC Packets Bytes
------------------------------- -------------------------------
0 680458 87098624 0 0 0
1 0 0 1 32318 0
2 0 0 2 0 0
3 0 0 3 0 0
4 0 0 4 0 0
5 0 0 5 0 0
6 0 0 6 0 0
7 0 0 7 0 0
See Also qos maps, cee-map