Dell 8 - Show Tech-Support

40 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show tech-support
2
show tech-support
Displays output for troubleshooting.
Synopsis show tech-support
Operands none
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to run a script that automatically runs a variety of show commands with output
that is useful to Technical Support for troubleshooting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display output for troubleshooting:
switch#show tech-support
------------------ date ------------------
Thu Feb 19 18:30:13 UTC 2009
--------------show version ------------------
Fabric Operating System Software
Fabric Operating System Version: 6.1
Copyright (c) 1995-2008 Brocade Communications Systems, Inc.
Build Time: 03:35:17 Feb 18, 2009
switch uptime: 04:11:09
Firmware name: v6.1.2
Switch Model Name: Dell M8428-k
Control Processor: Freescale Semiconductor 8548E with 1016 MB of memory
4MB of boot flash memory.
8 FC Port(s)
24 Ten GigabitEthernet/IEEE 802.3 interface(s)
------------------ show running-config ------------------
!
switch#
See Also none