Dell 8 - Description

Dell Converged Enhanced Ethernet Command Reference 63
53-1002115-01
description
4
description
Specifies a string that contains the description of the interface.
Synopsis description line
no description
Operands line Specifies characters describing the interface. The maximum number of
characters is 64.
Defaults There are no default configurations for this command.
Command
Modes
Interface configuration mode
Description Use this command to specify a string that contains the description of the interface. Use the no
description command to remove the description.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set the string describing internal tengigabitethernet interface 0/1:
switch(conf-if-te-0/1)#description converged_101
See Also none