Dell 8 - Chapter 9 Fcoe Configuration Commands; Fcoe-Map

Dell Converged Enhanced Ethernet Command Reference 137
53-1002115-01
Chapter
9
FCoE Configuration Commands
fcoe-map
Activates the FCoE map configuration mode.
Synopsis fcoe-map default
no fcoe-map
Operands default The CEE map name.
Defaults The only map name available is “default.”
Command
Modes
Global configuration mode
Description Only a single CEE map is allowed, named “default”.
Defaults There are no default configurations for this command.
Command
Modes
Global configuration mode
User Guidelines Use no fcoe-map to revert to the default values for the map.
Examples none
See Also fcoeport