Dell 8 - System-Name

120 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
system-name
6
system-name
Sets the global system name specific to LLDP.
Synopsis system-name name
Operands name Specifies a system name for the LLDP. The valid values is a maximum of32
characters.
Defaults By default, the host name from the switch is used.
Command
Modes
Protocol LLDP configuration mode
Description Use this command to set the global system name specific to LLDP.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To specify a system name for the LLDP:
switch(conf-lldp)#system-name Dell
See Also system-description