Dell 8 - Run-Script

Dell Converged Enhanced Ethernet Command Reference 23
53-1002115-01
run-script
2
run-script
Used to run a script file on the switch.
Synopsis run-script {flash://]filename}
Operands filename Name of the script file in the Flash memory.
Description Use this command to run a script file residing in the Flash.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC Mode
User Guidelines The scripting support only supports textual configuration files. It does not handle any scripting
languages, such as Tcl, Expect, and so on.
Example none
See Also none