Dell 8 - IP Configuration Commands; Arp

Dell Converged Enhanced Ethernet Command Reference 75
53-1002115-01
Chapter
5
IP Configuration Commands
arp
Configures a static ARP connection.
Synopsis arp ip-address hardware-address
no arp ip-address
Operands ip-address IP address in four-part dotted decimal format corresponding to the local
data-link address.
hardware-address Local data-link address (a 48-bit address).
no arp Cancels the connection for the specified address.
Description Use this command to define a static ARP connection between an IP address to a local data link
address.
Defaults There are no default configurations for this command.
Command
Modes
Global configuration mode
User Guidelines There are no usage guidelines for this command.
Example none
See Also none