Dell 8 - Show Debug Lldp

114 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show debug lldp
6
show debug lldp
Displays the LLDP debugging status on the switch.
Synopsis show debug lldp
Operands none
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the LLDP debugging status on the switch.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display the LLDP debugging status on the switch:
switch#show debug lldp
LLDP debugging status:
Interface te0/0 : Transmit Receive Detail
See Also none