Dell Converged Enhanced Ethernet Command Reference 17
53-1002115-01 
fos
2
supportsave    
switchshow   
zoneshow       
Usage
Guidelines
The Fabric OS syntax applies to the listed commands. The fcoelogincfg, fcoelogingroup, and 
fcoelogincfg commands are not supported from cmsh shell. See the Fabric OS Command 
Reference for additional information on these commands.
Examples To run the Fabric OS command switchshow from the Privilege EXEC mode:
switch#fos switchshow
switchName:     switch
switchType:     76.6
switchState:    Online
switchMode:     Native
switchRole:     Principal
switchDomain:   1
switchId:       fffc01
switchWwn:      10:00:00:05:1e:76:42:00
zoning:         OFF
switchBeacon:   OFF
Area Port Media Speed State     Proto
=====================================
  0   0   --    N8   No_Module   FC
  1   1   --    N8   No_Module   FC
  2   2   --    N8   No_Module   FC
  3   3   --    N8   No_Module   FC
  4   4   --    N8   No_Module   FC
  5   5   --    N8   No_Module   FC
  6   6   --    N8   No_Module   FC
  7   7   --    N8   No_Module   FC
  8   8   --    10   Online     FCoE F-Port  20:08:00:05:1e:76:42:00
  9   9   --    10   Online     FCoE F-Port  20:09:00:05:1e:76:42:00
 10  10   --    10   Online     FCoE F-Port  20:0a:00:05:1e:76:42:00
 11  11   --    10   Online     FCoE F-Port  20:0b:00:05:1e:76:42:00
 12  12   --    10   Online     FCoE F-Port  20:0c:00:05:1e:76:42:00
 13  13   --    10   Online     FCoE F-Port  20:0d:00:05:1e:76:42:00
See Also none