Job Assembly
119
When all documents have been scanned, select [Last Original].
Note • After the first original set is copied, the machine automatically outputs the data remained if the
machine is left unused for the period specified in [Auto Clear]. For more information on [Auto Clear],
refer to "Auto Clear" (P.296).
1
Select [Combine Original Sets].
2
Select [On].
Off
Disables this feature.
On
Enables this feature.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may not
detect the top of the document correctly.
• Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
• Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
To Next Page
Loading...
Need help?
General