3 Copy
82
Color Shift (Adjusting the Color Tone)
This feature allows you to adjust the tone of the colors to be reproduced in copies, by a
maximum of two levels in two directions.
On the screen, the [Original Color] slider represents the color tone of the original document,
and the [Copy Color] slider represents the color tone of output copies. Selecting a button on
the screen moves the [Original Color] slider to adjust the tone of the colors.
When the [Original Color] slider is moved to the left, the Y (yellow) cell on the [Original
Color] slider becomes closer to the R (red) cell on the [Copy Color] slider, and thus a yellow
fruit appears more reddish and riper-looking. At the same time, the tone of all the other
colors changes. The red color appears more magentish, and the green color appears more
yellowish.
Conversely, when the [Original Color] slider is moved to the right, the Y (yellow) cell on the
[Original Color] slider becomes closer to the G (green) cell on the [Copy Color] slider, and
thus a yellow fruit appears more greenish. At the same time, the tone of all the other colors
changes. The magenta color appears more reddish, and the red color appears more yellowish.
Note • Ensure that [Output Color] is set to [Color] on the [Copy] screen. [Color Shift] is not available when
[Output Color] is set to [Black & White].
• If [Color Shift] is set concurrently with [Color Effects], the setting made in [Color Effects] will be
cleared.
1
Select [Color Shift].
2
Select a button to adjust the color tone.
To Next Page
Loading...
Need help?
General