Adjusting Color Registration
251
Adjusting Color Registration
Allows you to calibrate the color registration automatically or manually.
Note • The color registration is automatically adjusted and usually without any user action. However, if the
misregistration becomes large during the next automatic adjustment from the last adjustment, you can
adjust the color registration using this feature.
Auto Color Registration
1
Press the <Log In/Out> button.
2
Enter the System Administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the System Administrator’s passcode, and
select [Enter].
Note • The default user ID is "admin".
• The default passcode is "1111".
3
Select [Tools] on the [Home] screen.
Note • When the [Home] screen is not displayed on
the touch screen, press the <Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Maintenance].
To Next Page
Loading...
