Adjusting Color Registration
253
Side Color Registration
After executing the automatic color calibration, you can manually adjust the horizontal
colors for yellow, magenta, and cyan by entering values.
Note • Use Tray 5 and plain A4 size paper for this feature.
1
Repeat step 1 to 6 from the previous section.
2
Select [Side Color Registration].
3
Insert a A4 paper into Tray 5, and press [Sample Printout].
Note • An error occurs if any paper other than A4 paper is set to Tray 5.
4
Find the values of the straightest lines from the
LY (left) and RY (right) patterns for yellow.
5
Select [Yellow] and enter the values that you
found in the color registration chart to make
adjustments.
6
Repeat steps 3 to 5 for [Magenta] and [Cyan].
7
Press [Adjust].
To Next Page
Loading...
Need help?
General