Copying Procedure
53
3
If the previous settings still remain, press the
<Clear All> button.
4
Select each tab, and configure features as
necessary.
The following shows the reference section for each tab.
"Copy" (P.64)
"Image Quality" (P.76)
"Layout Adjustment" (P.83)
"Output Format" (P.99)
"Job Assembly" (P.113)
Step 3 Entering a Quantity
The following describes how to enter the number of copy sets. You can enter up to 999 sets.
1
Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the
upper right of the touch screen.
2
If you have entered an incorrect value, press the
<C (Clear)> button and then enter the correct
value.
To Next Page
Loading...
Need help?
General