17 Printer Environment Settings
426
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer by
connecting the machine to a network.
Enable the necessary port using the control panel or Dell Printer Configuration Web Tool.
Note • The print drivers are contained in the Driver CD Kit. For information on the driver installation
procedures, refer to the manual contained in the Driver CD Kit.
• You can download the latest print driver from our web site.
Using the Machine as a Local Printer
USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation
When Using USB Port" (P.429).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to connect
the machine.
LPD
Use LPD when direct communication between the machine and a computer via TCP/IP is
available.
For more information on how to set up the machine using LPD, refer to "Installation When Using
TCP/IP (LPD/Port 9100)" (P.431).
NetWare
The machine supports the PServer mode using Netware directory service and bindery service.
The PServer mode enables the machine to function as a printer server, and to retrieve print
jobs in the print queue to output. The printer created for the machine consumes one user
license of the file server.
To Next Page
Loading...
Need help?
General