Power Saver Mode
39
Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode.
The Power Saver mode is exited in the following instances:
•
Pressing the <Power Saver> button
• Receiving a job
• Selecting [Apply] in Dell Printer Configuration Web Tool
• Setting a document in the document feeder
• Opening the document cover
When the following device is connected to the machine and a user performs the following
operation, the Low Power mode can be deactivated without pressing the <Power Saver>
button.
• Placing a smart card on the smart card reader
Note • If the machine is in the Sleep mode, however, the Sleep mode will not be deactivated by the operation
above. To take full advantage of the feature that deactivate the Low Power mode without pressing the
<Power Saver> button, it is recommended to set the time to elapse until the machine enters the Sleep
mode long enough.
1
Press the <Power Saver> button.
To Next Page
Loading...
