10 Job Status
182
Printing and Deleting Stored Jobs
This section describes how to print or delete jobs stored with the Secure Print or Sample Set
feature, or stored with the [Receive Control] setting of the Charge Print feature. The [Secure
Print Jobs & More] screen allows you to print or delete stored jobs.
The following shows the reference section for each feature.
Secure Print ..............................................................................................................................182
Sample Set................................................................................................................................184
Delayed Print............................................................................................................................186
Charge Print .............................................................................................................................187
Private Charge Print.................................................................................................................190
Public Folder ............................................................................................................................192
Undelivered Faxes....................................................................................................................193
1
Press the <Job Status> button.
2
Select the [Secure Print Jobs & More] tab.
[Secure Print] and [Private Charge Print] are not displayed simultaneously on the screen. For more
information on the settings, refer to "Charge/Private Print Settings" (P.412).
Secure Print
This feature allows you to temporarily store print data in the machine to print it with the
print command from the machine. The feature also enables you to set a passcode, which is
helpful to print confidential documents.
The following describes how to print or delete jobs stored with the Secure Print feature.
Note • This feature does not appear when [Receive Control] in [Charge / Private Print Settings] is set to either
of the following:
- Select [According to Print Accounting], and then select [Save as Private Charge Print Job] in [Job
Login Success].
- Select [Save as Private Charge Print Job].
When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in [Receive Control]
under [Charge / Private Print Settings], jobs will not be saved in [Secure Print] under [Secure Print
Jobs & More] even if you select [Secure Print] on the print driver. For more information, refer to
"Charge/Private Print Settings" (P.412).
For information on how to operate a Secure Print job, refer to the print driver's help.
To Next Page
Loading...
Need help?
General