Copy
67
• Fit Image to Paper Size X-Y%
Automatically determines the reduction/enlargement ratios for the width and length so
that the document image fits in the paper, and then slightly reduces the ratios so that the
complete image is copied onto the paper.
• Width: XX% Length: XX%
Allows you to specify the preset reduction/enlargement ratios.
Paper Supply (Selecting the Paper for Copying)
This feature allows you to select the tray that holds the paper you want to use.
1
Select a paper tray.
Auto Select
Automatically determines the tray holding the appropriate paper, based on the document
size and the specified copy ratio.
Note • This cannot be selected together with [Auto %] under [Reduce / Enlarge].
Trays (2nd to 5th buttons on the screen)
Allows you to directly select the desired tray.
You can change the paper tray associated with each button on the [Copy] screen. For information on
the settings, refer to "Paper Supply - Button 2 - 5" (P.317).
More
Displays the [Paper Supply] screen.
Refer to "[Paper Supply] Screen" (P.68).
To Next Page
Loading...
Need help?
General