Machine Information
269
For information on setting whether to print the report automatically, refer to "Job Flow Error Report"
(P.307).
Overwrite Hard Disk
You can check the overwriting status of the hard disk. "Overwriting" indicates that the
overwriting is in progress. "Standby" indicates that the overwriting is completed.
Note • [Overwrite Hard Disk] appears when [Overwrite Hard Disk] is enabled under [Authentication / Security
Settings]. For more information, refer to "Overwrite Hard Disk" (P.415).
1
Select [Overwrite Hard Disk].
2
Check the overwriting status of the hard disk.
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode and
retrieve the programming.
Note • The items displayed vary depending on the options installed.
1
Select [Print Mode].
2
Select [Off-line] or [On-line].
Off-line
The machine does not accept data from a computer. Any data being sent is cancelled and
not printed.
On-line
The machine accepts data from a computer.
3
Select a printer language to set a print mode.
4
Set each item.
To Next Page
Loading...
Need help?
General