To Next Page

To Previous Page

15 Tools

280

System Settings Procedure

To change or customize the system settings, enter the System Administration mode.

This section describes the basic procedures for system settings. The following shows the

reference section for each procedure.

Step 1 Entering System Administration Mode ......................................................................280

Step 2 Entering the System Administrator User ID and Passcode .......................................280

Step 3 Selecting [Tools] ..........................................................................................................281

Step 4 Selecting a Tab on the [Tools] Screen........................................................................281

Step 5 Setting a Feature ..........................................................................................................283

Step 6 Exiting System Administration Mode.........................................................................283

Step 1 Entering System Administration Mode

Press the <Log In/Out> button or the login

information field on the touch screen.

Step 2 Entering the System Administrator User ID and Passcode

To enter the System Administration mode, enter the System Administrator’s User ID. If

[Passcode Entry from Control Panel] is set to [On] under [Tools] > [Authentication/

Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.

We recommend that you change the System Administrator’s User ID and passcode

immediately after installing the machine.

For more information on how to change the passcode, refer to "System Administrator Settings"

(P.407).

Enter the system administrator's user ID with

the numeric keypad or the keyboard displayed

on the screen, and select [Enter].

When a passcode is required, select [Next] and

enter the system administrator's passcode, then

select [Enter].

Note • The default user ID is "admin".

• The default passcode is "1111".

• The screen may differ depending on the settings of the machine.

• The <Log In/Out> button is lit when the machine enters the System Administration mode.

<Log In/Out> button

Dell C5765DN User Manual

Other manuals for Dell C5765DN