Fax Service Settings
365
Block Inbound Faxes
Set a G3-ID (fax number) from which you want to reject a fax reception. You can specify up
to 50 G3-IDs.
You can find the G3-ID of the sender that you want to reject in "Remote Station" column of
an Activity Report or "Input Source" column of a Job History Report.
Block Unknown Fax Numbers
Set whether or not to receive faxes from unknown G3-ID fax numbers. When [Yes] is
selected, the machine does not receive faxes from unknown fax numbers.
Fax Received Options
Fax Received Options allows you to specify a method for classifying received fax documents
into specified folders.
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by
line type and store them in the folders specified.
1
Select [Folder Selector Setup].
2
Select the line to register, and then select
[Change Settings].
Note • The displayed items may vary depending on
the options installed.
3
Select [On].
4
Enter the folder number (three digits) where you want to store the faxes with the numeric
keypad.
5
Select [Save].
Reduce/Enlarge Presets
You can set the magnifications displayed as [Preset %] which are displayed under [Reduce/
Enlarge] in the [Layout Adjustment] screen. You can assign any magnification to the R/E
Preset buttons other than [100%] and [Auto %].
Preset %
You can select a ratio from preset ratios.
Variable %
You can specify a magnification from 50 to 400% in 1% increments.
To Next Page
Loading...
Need help?
General