Printing and Deleting Stored Jobs
187
Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.187).
When [Delete] is Selected
1
Select [Delete].
Delete
Deletes the job.
Note • Once the job is deleted, it cannot be restored.
Cancel
Cancels deleting the job.
When [Print] is Selected
1
Select [Yes].
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is set
to [Disabled] in the System Administration
mode. If [Disabled] is selected, the machine
automatically deletes the job after printing
without displaying the confirmation screen.
For more information, refer to "Print Job
Confirmation Screen" (P.375).
Yes
Starts printing the job. After printing, the job is deleted.
No
Cancels printing the job.
Charge Print
This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
authenticated users. You can also configure the machine to store print jobs temporarily, and
then print them from the machine’s control panel.
If received print jobs are set to be saved as Charge Print under [Tools] > [Authentication /
Security Settings] > [Authentication] > [Charge / Private Print Settings] > [Receive
Control], the jobs are saved for each Billing ID. Any jobs that were not given a Billing ID on
the print driver are saved in [No User ID].
For more information on how to register user IDs on the machine, refer to "Create/View User
Accounts" (P.398).
To Next Page
Loading...
Need help?
General