22 Problem Solving
622
2
Use the handle to lift the duplex module.
3
Remove any paper from the duplex module.
4
Close the right hand cover.
Note • When closing the right hand cover, apply your
hand in the vicinity of the handle as shown in
the illustration, and then press the cover firmly
toward the printer.
Paper Jams in Finisher-AB1
The following describes how to clear paper jams occurring in the Finisher-AB1 (optional).
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Rotate the knob clockwise and remove the
jammed paper from the paper exit of the
finisher.
To Next Page
Loading...
