Configuration of Scan to PC
457
6
Print a configuration report to confirm that the SMB port or FTP client is enabled and that
TCP/IP is set up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.260).
Step 3 Configuration on the Computer
Create a destination folder on your computer.
•Using FTP
Create a destination folder on the server where you login and set write rights on the folder.
•Using SMB
Create a shared folder on your computer and set the write rights on the shared folder.
Note • To use SMB on Mac OS X, set [Windows Sharing] to [On] in the [Service] tab of [Sharing] under
[System Preferences].
To Next Page
Loading...
