14 Machine Status
270
Note • The items displayed vary depending on the printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1
Select [Retrieve Programming].
2
Select the memory number to use.
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in the memory.
Programming
You can check or change the value set for the print mode item number.
1
Select [Programming].
2
Enter the item number of the feature to set in
[Item Number] with the numeric keypad.
3
Select [Confirm].
4
Select [Change Value].
5
Enter [New Value] with the numeric keypad.
6
Select [Save].
Store / Delete Programming
For ESC/P-K and HP-GL/2 emulations, you can register settings in memory.
You can register up to 20 print modes for ESC/P-K and HP-GL/2 emulations.
1
Select [Store / Delete Programming].
To Next Page
Loading...
Need help?
General