22 Problem Solving
600
033-521
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-522
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
033-523
[Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly, and then
execute the operation again.
033-526
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the model of the sender's machine, and then execute the operation again. If
receiving, ask the sender to send again.
033-527
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-528
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530
[Cause] Received a procedure disabled signal.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-531
[Cause] Received a command rejection signal.
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-532
033-533
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-534
[Cause] The other machine does not offer a feature to print the number of document sets sent.
[Remedy] Do not specify multiple sets.
033-535
[Cause] An error occurred during fax transmission.
[Remedy] Confirm information such as the recipient and folder information, and execute the
operation again.
033-536
033-537
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.
033-538
033-539
033-540
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-541
[Cause] The recipient is not specified.
[Remedy] Specify the recipient correctly.
033-543
[Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.
033-544
[Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
Status Code Cause and Remedy
To Next Page
Loading...
