Dell PowerEdge XE9680 - Right Control Panel (RCP)

Right Control Panel (RCP)
The right control panel encompasses many of the features no longer supported by the left control panel.
Figure 4. Right control panel view
Table 4.
Right control panel
Item Indicator or button Icon Description
1 VGA port Enables you to connect a display device to the system.
For more information, see the PowerEdge Manuals.
2 iDRAC Direct port (Micro-AB
USB)
The iDRAC Direct port (Micro-AB USB) enables you to
access the iDRAC Direct Micro-AB features. For more
information, see the Integrated Dell Remote Access
Controller User's Guide
NOTE: You can configure iDRAC Direct by using
a USB to micro USB (type AB) cable, which you
can connect to your laptop or tablet. Cable length
should not exceed 3 ft (0.91 meters). Performance
could be affected by cable quality.
3 USB 2.0-compliant port The USB port is a 4-pin connector and 2.0-compliant.
This port enables you to connect USB devices to the
system.
4 Power button Indicates if the system is powered on or off. Press the
power button to manually power on or off the system.
Dell PowerEdge XE9680 system configurations and features 13