Figure 139. Installing the A100 GPU top cover
Next steps
1. Replace the GPU tray.
2. Replace the GPU fan cage.
3. Replace the GPU fans.
4. Follow the procedure listed in After working inside your system.
Removing the A100 GPU
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove the GPU fan cage.
4. Remove the GPU tray.
5. Remove the GPU top cover.
NOTE:
For heatsink removal, it is required to use a Phillips screwdriver or bit with a narrow shaft that is at least 15cm (6
inches) of length.
Steps
1. Remove GPU air baffles from between the heatsink.
NOTE: There are a total of three GPU air baffles.
Installing and removing system components 165
To Next Page
Loading...
