Figure 140. Removing the side GPU air baffle
Figure 141. Removing the center GPU air baffle
2. Identify the failed GPU and using Phillips 1 screwdriver, loosen the heatsink screws in the order that is mentioned below:
a. Loosen the heatsink screws 3 turns each in the following order. Disassembly order:1, 2, 3, 4.
b. Return to first screw and completely loosen it.
c. Completely loosen the remaining screws in the correct order.
3. Lift and remove the heatsink from the GPU socket.
166
Installing and removing system components
To Next Page
Loading...
