Installing the GPU top cover
The procedure to install the H100/H800 GPU and A100 GPU top cover is same.
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove rear GPU fans.
4. Remove the GPU fan cage.
5. Remove the GPU tray.
Steps
1. Align and place the GPU top cover down.
2. Push the GPU top cover from the front toward the rear of the GPU tray until it auto-locks by latch on both sides.
Figure 138. Installing the H100/H800 GPU top cover
164
Installing and removing system components
To Next Page
Loading...
