System weight
Table 7. Weight for the PowerEdge XE9680 system with 8 x 2U SSDs
System configuration Maximum weight (with all drives/SSDs)
XE9680 system with fully populated with H100/H800 107 kg (235.89 pounds)
XE9680 system with fully populated with A100 105 kg (231.48 pounds)
XE9680 system L10, without 8 x U2 SSDs, 6 x PSUs, 1 x GPU
module, 10 x PCIe cards, 1 x BOSS module
70.19 kg (154.74 pounds)
Table 8. Weight for the PowerEdge XE9680 system with 16 x E3.s SSDs
System configuration Maximum weight (with all drives/SSDs)
XE9680 system with fully populated with H100/H800 107.75 kg (237.55 pounds)
XE9680 system with fully populated with A100 106 kg (233.69 pounds)
XE9680 system L10, without 16 x E3.s SSDs, 6 x PSUs, 1 x
GPU module, 10 x PCIe cards, 1 x BOSS module
70.76 kg (155.99 pounds)
Table 9. PowerEdge system weight handling recommendations
Chassis weight Description
40 pounds - 70 pounds Recommend two person to lift
70 pounds- 120 pounds Recommend three person to lift
≥ 121 pounds Recommend to use a server-lift
CAUTION: The system is heavy therefore can slide over and cause damage during installation and removal from a
higher position on the rack.
Processor specifications
Table 10.
Processor specifications for the PowerEdge XE9680 system
Supported processor Number of processors supported
4
th
Generation Intel Xeon Scalable processors with up to 56
cores
Two
PSU specifications
The PowerEdge XE9680 system supports six AC or DC power supply units (PSUs).
Table 11.
PSU specifications for the PowerEdge XE9680 system
PSU Class Heat dissipation
(maximum)
Frequency Voltage Current
2800 W Mixed
Mode
Titanium 10500 BTU/hr 50/60 Hz 200 - 240 V AC 15.6 A
N/A 10500 BTU/hr N/A 240 V DC 13.6 A
3200 W Mixed
Mode
Titanium 12000 BTU/hr 50/60 Hz 277 V AC 13 A
N/A 12000 BTU/hr N/A 336 V DC 11.5 A
NOTE: PowerEdge XE9680 system supports minimum of 5 PSUs.
26 Technical specifications
To Next Page
Loading...
