Dell PowerEdge XE9680 - GPU fans and cage; Removing a GPU fan module

Figure 125. Set the anti-tilt wires to the locked position and tightening the nuts
Next steps
1. Install the air shroud.
2. Follow the procedure listed in the After working inside your system.
GPU fans and cage
Removing a GPU fan module
There are ten GPU fan module on the rear of the system. The procedure to remove is similar.
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Press the latch on the GPU fan module.
2. Using other hand pull out the GPU fan module to disconnect from the connector on the rear fan cage assembly.
Installing and removing system components
153