Figure 131. Removing the A100 GPU tray
Next steps
1. Replace the GPU tray.
Installing the GPU tray
The procedure to install the H100 GPU and A100 GPU is same.
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove rear GPU fan(s).
4. Remove the GPU fan cage.
CAUTION: Ensure that two people operate the GPU tray due to its heavy weight.
Steps
1. Lift and align the GPU tray with the rear of the chassis to ensure correct orientation.
NOTE: Two people are needed to carry the GPU tray from each side.
2. Using both hands, slowly push GPU tray along the track from the rear of the chassis.
NOTE: The GPU tray will slide forward and connect to the connector.
3. Using both hands, push the handle until it is in a vertical position and self-locks at the same time
Installing and removing system components
159
To Next Page
Loading...
