Next steps
1. Replace the A100 GPU.
2. Remove the A100 baseboard.
Removing the A100 baseboard
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove the GPU fan cage.
4. Remove the GPU tray.
5. Remove the GPU top cover.
NOTE: For heatsink removal, it is required to use a Phillips screwdriver or bit with a narrow shaft that is at least 15cm (6
inches) of length.
Steps
1. Remove GPU air baffles from between the heatsink.
NOTE: There are a total of three GPU air baffles.
Figure 144. Removing the side GPU air baffle
168
Installing and removing system components
To Next Page
Loading...
