Figure 145. Removing the center GPU air baffle
2. Using Phillips 1 screwdriver, loosen the screws securing front heatsink in the order that is mentioned below:
a. Loosen the heatsink screws 3 turns each in the following order. Disassembly order:1, 2, 3, 4.
b. Return to first screw and completely loosen it.
c. Completely loosen the remaining screws in the correct order.
3. Lift and remove the front heatsink from the GPU socket.
NOTE:
There are four front side heatsinks on the GPU baseboard. Repeat steps 2 and 3 to remove remaining front
heatsinks.
Installing and removing system components 169
To Next Page
Loading...
