Table 60. Redundant OS Control details(continued)
Option Description
Redundant OS Boot
NOTE: This option is disabled if Redundant OS Location is set to None or if
Redundant OS State is set to Hidden.
When set to Enabled, BIOS boots to the device specified in Redundant OS Location.
When set to
Disabled, BIOS preserves the current boot list settings. This option is set to
Disabled by default.
Miscellaneous Settings
To view the Miscellaneous Settings screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > Miscellaneous Settings.
Table 61. Miscellaneous Settings details
Option Description
System Time Enables you to set the time on the system.
System Date Enables you to set the date on the system.
Time Zone Enables you to select required Time Zone.
Daylight Savings Time Enables or disables Daylight Savings Time. This option is set to Disabled by
default.
Asset Tag Specifies the asset tag and enables you to modify it for security and tracking
purposes.
Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or
disabled. This option is set to On by default.
NOTE: This option does not apply to 84-key keyboards.
F1/F2 Prompt on Error Enables or disables the F1/F2 prompt on error. This option is set to Enabled by
default. The F1/F2 prompt also includes keyboard errors.
Load Legacy Video Option ROM This option determines whether th system BIOS will load legacy video (INT 10h)
option ROM from the video controller. This option is set to Disabled by default.
NOTE: This option cannot be set to Enabled, when the Boot mode is UEFI
and Secure Boot is enabled.
Dell Wyse P25/P45 BIOS Access Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to
Enabled by default.
Power Cycle Request Enables or disables the Power Cycle Request. This option is set to None by
default.
iDRAC Settings
The iDRAC settings is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings.
NOTE: Accessing some of the features on the iDRAC settings needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at iDRAC Manuals.
60
Pre-operating system management applications
To Next Page
Loading...
