Table 5. Rear view of the system(continued)
Item Ports, panels, or slots Icon Description
NOTE: If the server stops responding during POST, press and
hold the System ID button for more than five seconds to enter
the BIOS progress mode
NOTE: To reset the iDRAC (if not disabled on the iDRAC setup
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
8 Dedicated iDRAC9 Ethernet
port
Enables you to remotely access iDRAC. For more information, see the
Integrated Dell Remote Access Controller User's Guide at PowerEdge
Manuals.
9 USB 2.0 port The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
10 USB 3.0 port The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
11 Power supply unit (PSU4) Indicates the PSU4.
12 VGA port Enables you to connect a display device to the system.
13 Power supply unit (PSU5) Indicates the PSU5.
14 Power supply unit (PSU6) Indicates the PSU6 or redundant PSU.
15 GPU fans N/A Fans for GPU and PCIe card cooling
Dell PowerEdge XE9680 system configurations and features 15
To Next Page
Loading...
