Figure 147. Removing the A100 NVlink heatsink
7. Lift and remove the NVlink heatsink from the GPU baseboard.
NOTE:
There are six NVlink heatsinks on the GPU baseboard. Repeat steps 6 and 7 to remove remaining NVlink
heatsinks.
8. Using Torx 15 screwdriver, release the 16 captive screws that secure the GPU baseboard onto the GPU tray.
NOTE: Do not remove any GPUs. Replacement A100 baseboard comes with 8 new GPUs already attached.
9. Using the handles on the GPU baseboard lift it from the GPU tray.
Installing and removing system components
171
To Next Page
Loading...
