Figure 149. Installing the A100 GPU
4. Align and insert the heatsink on the GPU socket.
5. Using Phillips 1 screwdriver, tighten the heatsink screws in the order that is mentioned below:
a. Tighten the screws securing the heatsink 3 turns each in the following order. Assembly order:1, 2, 3, 4.
b. Return to first screw and completely tighten it.
c. Completely tighten the remaining screws in the correct order.
NOTE: When installing the GPU heatsink, ensure that the final torque value is 4.0 ± 4% lbf-in or 0.45 ± 4% N-m.
Figure 150. Installing the A100 GPU heatsink
Installing and removing system components
173
To Next Page
Loading...
