Connecting and Setting Up Your Printer
75
Auto SSID Setup
1
Press the
(Information)
button.
2
Ta p t h e
Tools
tab, and then tap
Admin Settings
.
3
Ta p
Network
.
4
Ta p
Wi-Fi
.
5
Ta p
Wi-Fi Setup Wizard
.
The printer automatically searches the access points on wireless network.
6
Tap until the desired access point appears, and then select the access point.
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE:
Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7
Ta p
Next
.
8
Enter the WEP key or passphrase.
When the encryption type of the selected access point is WEP in step 6:
a
Ta p t h e
WEP Key
text box, and then enter the WEP key.
b
Ta p
OK
.
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
a
Ta p t h e
Passphrase
text box, and then enter the passphrase.
b
Ta p
OK
.
9
The
Restart System
screen appears.
10
Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Manual SSID Setup
1
Press the
(Information)
button.
2
Ta p t h e
Tools
tab, and then tap
Admin Settings
.
3
Ta p
Network
.
4
Ta p
Wi-Fi
.
5
Ta p
Wi-Fi Setup Wizard
.
6
Ta p t h e
Manual SSID Setup
check box, and then tap
Next
.
7
Enter the SSID, and then tap
Next
.
8
Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment, and then tap
Next
.
If you select
Infrastructure
, proceed to step 9.
If you select
Ad-hoc
, proceed to step 10.
To Next Page
Loading...
