6. Other Field Service Ver. 1.0 Apr. 2005
50
ineo 161
ineo 210
Maintenance
2. Wind the cable on side B around
wire pulley 2 four turns counterclock-
wise, starting with the slit at the bot-
tom in the rear left of the pulley.
3. Wind the cable on side A around
wire pulley 2 four turns clockwise,
starting with the slit at the top in the
front left of the pulley.
4. Affix tape to secure the cable to wire
pulley 2.
5. Pass the cable (silver) through wire
pulley 1.
4035D111AA
4035D112AA
4035D113AA
4035D114AA
Side B
Side A
To Next Page
Loading...
