2) Save:
To save image to desired path.
3) Cancel:
To cancel snapshot.
Digital zoom in/ out:
Select a channel to enable digital zoom function
Drop:
Drop the camera from monitoring.
Drop all:
Drop all cameras from monitoring.
Add all:
Add all cameras from monitoring.
Remote IO:
Check camera DI/DO control for its input pins and output pins.
Note: This feature supports Brickcom cameras for now.
(1) Camera Input:
Directly check camera input status
(On or Off)
(2) Camera Output:
Directly check and enable/disable
camera output setting
If camera does not support DI/DO feature, a window will pop up
as below.
Camera information:
Consist of Camera Name, IP address, bit rate, and status.
To Next Page
Loading...
