122
4. PTZ Control Panel
If IP camera supports PTZ function, users can use the control panel to adjust the
viewing angle. The following functions are available depending on the camera
models.
PTZ panel:
PTZ allows users to monitor large areas with a single network
camera. Pan, tilt, and zoom functions can be controlled
remotely by users. If device supports PTZ control, users can
click on the arrows to pan and/or tilt the camera. The house in
the middle can take users back to original monitoring position.
Preset positions:
Select the preset positions which are defined in PTZ camera
and the camera will move to the position that user selects.
Optical zoom in/ out:
If camera supports PTZ control, users can adjust PTZ camera to
zoom out or zoom in.
Focus near / far:
If camera supports PTZ control, users can adjust the focus of
the PTZ camera to focus near or focus far.
Auto Focus:
To automatically focuses the camera lens on a subject.
Schedule for PTZ:
Select “Set” to set camera preset position. (reserved)
It can open the dialog to set how many times PTZ cruise to
repeat and how many seconds stay between each preset point
Schedule for PTZ:
Click “Go” to start PTZ patrol schedule.
5. Event log:
Event log can help users to notice motion detection at the very first time. When a
motion is detected, the icon will start blinking.
To Next Page
Loading...
