6.23 Card Reader Replacement
The card reader is located under the printer carriage. The carriage will be removed to access
the card reader.
1
Remove the (2) #10 Torx screws at the top of the metal printer carriage, slide the carriage
back to disengage the tabs on the bottom bracket, then remove the carriage. Fig 6.78.
Figure 6.78: Printer Carriage
2
Remove the gasket from the front of the card reader. Save the gasket for reuse.
WM048523 Rev 08 01/2019 143
6 Replacement Procedures
To Next Page
Loading...
