16.3 Solenoid Valve Replacement
1
Relieve pressure at the nozzle.
2
Close in ground inlet valve and cutoff ball valve.
3
Turn off power to the dispenser.
4
Disconnect relay wires at iGEM J2. Fig 16.25.
Figure 16.25: iGEM board
5
Remover retaining clip from coil and remove coil. Fig 16.26.
Figure 16.26: Coil clip
290 WM048523 Rev 08 01/2019
16 Helix LPG - IEC
To Next Page
Loading...
