Dover Wayne Helix WM048523 - Nozzle Boot, Switch, or Flipper Replacement

6.5 Nozzle Boot, Switch, or Flipper Replacement
1
Remove the 6 mm hex socket head screw that secures the nozzle boot.
screw
Figure 6.4: Removal of 6mm hex screw
2
Pull nozzle boot out from bottom and down to access the nozzle switch on back of the boot.
Figure 6.5: Removal of nozzle boot
82 WM048523 Rev 08 01/2019
6 Replacement Procedures